제품소개 Product

Laser Power&Energy Detector
11UP19-H
  • 11UP19-H
제조사 STANDA Ltd
11UP19-H

Laser Power Detector

 

Modular Concept
Increase the power capability of your detector with 5 different cooling modules
High Performance
Fast Rise Time (0.6 sec), High Damage Threshold (45 kW/cm2)
Compact Design
Only 20.6 mm thick (15S model)
Energy Mode
Measure single shot energy up to 15 J
Smart Interface
Containing all the calibration data
 
 

The 11UP series detectors can take a lot of laser power in a small body. They come ready to mount on a rod, a bracket and the square case even lets you set them right on the table. The 11UP19-15S-H5, just 21 mm thin, is ideal for laser maintenance and service applications. From a few mW to 15 W it is the smallest, toughest and fastest detector in its class. The absorber handles 36 kW/cm² of average power density. You can even run it up to 23 watts for short periods. With Energy Mode option every member of 11UP19-H family can be equipped to measure single shot pulse energies as well as average power. From 20 mJ up to 5 J Q-switched or 25 J long pulse. 11UP19-H often used with CO2, Ti: sapphire, Diode (pulsed or CW), YAG (diode pumped, CW or high rep. rate), Ruby (long pulse), DPSSL, Excimer, Argom ion lasers.

Specifications
Model 11UP19K-15S-H5 11UP19K-30H-H5 11UP19K-50L-H5 11UP19K-110F-H9 11UP19K-150W-H5 11UP19K-200W-H9
MAX AVERAGE POWER (CONTINUOUS / 1 MINUTE) 15 W / 30 W 30 W/ 60 W 50 W / 90 W 110 W / 150 W 150 W f / 190 W f 200 W f / 200 W f
EFFECTIVE APERTURE 19 mm Ø 19 mm Ø 19 mm Ø 19 mm Ø 19 mm Ø 19 mm Ø
COOLING METHOD Convection Heatsink Large Heatsink Fan-Cooled Water-Cooled Water-Cooled
MEASUREMENT CAPABILITY
Spectral Range * 0.19 – 20 µm 0.19 – 20 µm 0.19 – 20 µm 0.19 – 20 µm 0.19 – 20 µm 0.19 – 20 µm
Noise Equivalent Power a 1 mW 1 mW 1 mW 3 mW 1 mW 3 mW
Rise Time (nominal) b 0.6 sec 0.6 sec 0.6 sec 1.5 sec 0.6 sec 1.5 sec
Sensitivity (typ into 100 k Ω load) c 0.65 mV/W 0.65 mV/W 0.65 mV/W 0.23 mV/W 0.65 mV/W 0.23 mV/W
Calibration Uncertainty d ±2.5 % ±2.5 % ±2.5 % ±2.5 % ±2.5 % ±2.5 %
Repeatability ±0.5 % ±0.5 % ±0.5 % ±0.5 % ±0.5 % ±0.5 %
Energy Mode
   Sensitivity 0.65 mV/J 0.65 mV/J 0.65 mV/J 0.23 mV/J 0.65 mV/J 0.23 mV/J
   Maximum Measurable Energy e 15 J 15 J 15 J 25 J 15 J 25 J
   Noise Equivalent Energy a 0.02 J 0.02 J 0.02 J 0.06 J 0.02 J 0.06 J
   Minimum Repetition Period 4 sec 4 sec 4 sec 4 sec 4 sec 4 sec
   Maximum Pulse Width 88 ms 88 ms 88 ms 88 ms 88 ms 88 ms
   Accuracy with energy calibration option ±5 % ±5 % ±5 % ±5 % ±5 % ±5 %
DAMAGE THRESHOLDS
Maximum Average Power Density g 36 kW/cm2 36 kW/cm2 36 kW/cm2 45 kW/cm2 36 kW/cm2 45 kW/cm2
Pulsed Laser Damage Thresholds Max Energy Density Peak Power Density
   1064 nm, 360 µs, 5 Hz 5 J/cm2 (H5), 9 J/cm2 (H9) 14 kW/cm2 (H5), 25 kW/cm2 (H9)
   1064 nm, 7 ns, 10 Hz 1 J/cm2 143 MW/cm2
   532 nm, 7 ns, 10 Hz 0.6 J/cm2 86 MW/cm2
   266 nm, 7 ns, 10 Hz 0.3 J/cm2 43 MW/cm2
PHYSICAL CHARACTERISTICS
Effective Aperture 19 mm Ø 19 mm Ø 19 mm Ø 19 mm Ø 19 mm Ø 19 mm Ø
Absorber (High Damage Threshold) H5 H5 H5 H9 H5 H9
Dimensions 50H x 50W x 20.6D mm 50H x 50W x 56.3D mm 76.2H x 76.2W x 74.7D mm 54.2H x 54.2W x 55.6D mm 50H x 50W x 33D mm 50H x 50W x 33D mm
Weight (head only) 0.16 kg 0.21 kg 0.48 kg 0.25 kg 0.24 kg 0.24 kg
Specifications are subject to change without notice

* For the calibrated spectral range, see the user manual.
a. Nominal value, actual value depends on electrical noise in the measurement system.
b. With STANDA 11MAESTRO, 11UNO, 11P-LINK, 11TUNER and 11S-LINK monitors.
c. Maximum output voltage = sensitivity x maximum power.
d. Including linearity with power.
e. For 360 µs pulses. Higher pulse energy possible when customized for long pulses (ms), less for short pulses (ns).
f. Minimum cooling flow 0.5 liters/min, water temperature ≤ 22°C, 1/8 NPT compression fittings for 1/4 inch semi-rigid tube. Contact STANDA for clean deionized water cooling module option.
g. At 1064 nm, 10 W CW.