제품소개 Product

Optical Mounts
5MBM22S(P)
  • 5MBM22S(P)
제조사 STANDA Ltd
5MBM22S(P)

Mirror Mount

Mount with hard seat 5MBM22S-2-3

Mounts 5MBM22S, 5MBM22SP have a 1” and 2” mounting hole. A fixing screw secures the optics against 2 contact lines, which make 2 contact points. To prevent damage to the optics, the tip of the fixing screw is made of plastic. On one side the edge of the optics stays clear. So you can use the optics close to the edge in schemes where beams are very closely situated to one another. You may order mounts with 2 and 3 driving screws. Each screw has a hardened steel ball tip. It pushes the aluminium platform against a hard seat. This results in increased durability, stability, and fine motion. M6/Ø7 mounting/clearance holes are centered against the center of the mounted optics. The platform has an original L-shaped flat spring. It performs two functions: preloading the platform, and reducing its drift. The high-tension spring and the thick base of the unit increase its stability. This allowed to eliminate a part of the mount, keeping clear one side of the optics. Material: aluminium. Finish: black anodized (by default), or any other color on request.

Mount fixed by 45 degries
3A-45D Used to fix mount by 45o
A screw pushes via a seat of hardened stainless steel or sapphire. Both models use Fine screws 9S127 (with knobs) or 9SH127 (without knobs, hex key included) risk of tempering is reduced.
Flat spring (side view)
Rigid flat spring ensures stability and makes 5MBM22 series set-and-forget type of mounts.